AI & Smart Devices
PIR monitoring system for home care
Planning
We are planning a camera-free monitoring system that uses indoor activity information and SOS button presses to help family members and others check on the person being cared for.
The following projects are at the planning and evaluation stage. The functions and specifications described are not final.
- PIR sensors Detect only whether someone is moving in each room; SOS button
- Gateway Collects events over BLE and 920 MHz radio
- Cloud Receives via LTE-M and checks inactivity
- Family Notified by smartphone app or SMS
- Target customers
- Businesses considering home-care monitoring services
- Challenge
- When an older person living alone falls at home, it can take hours or even days before anyone notices. Cameras meet resistance, wearables are often taken off, and an SOS button only helps if the person can press it.
- Our proposal
- We are planning a system in which PIR (infrared) sensors in each room detect only whether someone is moving, so that a break in everyday activity can reveal a problem. No video or audio is collected.
- Yoozi’s role
- Planning and requirements for the Japanese market, proposal materials, specification coordination with the manufacturer, and finding pilot partners.
- Role of the manufacturer and others
- Sensors and gateways are expected to be designed and made by a partner manufacturer. How the monitoring service is run (who is notified, who visits) is decided with the operator.
Points to confirm
- Telling apart stillness, absence and loss of connection (to be verified in pilots)
- Japanese certification of the 920 MHz radio and LTE-M module, and carrier support
- Who is notified, step-by-step escalation and on-site response
- The communication method, number of nodes, battery life and similar items are design proposals or target values, not sales specifications.
How it differs from cameras and wearables
- It collects only whether someone is moving — no video or audio.
- Nothing has to be worn, and sensors can be placed in bathrooms and toilets.
- Even if the SOS button cannot be pressed, family members are alerted when there has been no movement for a long time.
Three levels of alert
- Emergency: when the SOS button is pressed, an alert is sent immediately by app and SMS.
- Attention: if no movement is detected in any room for a set time (e.g. 6–12 hours), family or carers are asked to check.
- Maintenance: low battery or loss of connection is reported so that monitoring is not interrupted.
Design targets (not sales specifications)
- Radio: BLE combined with the 920 MHz band (Sub-1G), aiming for reliable communication through walls.
- Cloud connection: LTE-M (Cat.M)
- Sensors: battery-powered, target battery life of two years or more; moisture protection for bathrooms (IP44/IP54 envisaged)
- Installation: adhesive mounting with no drilling (for rented and timber-frame homes)
Known limits and options
- PIR detects only movement, so no events occur while someone sits still; the length of time without movement is used instead.
- It is not designed to detect falls with certainty. Distinguishing stillness, absence and connection loss will be verified in pilots.
- Where stillness must be detected, millimetre-wave radar or door sensors can be considered in combination.
Source: PIR monitoring system proposal (October 2026, planning stage)
← AI & Smart DevicesTalk to us about this project
We welcome enquiries about adoption, partnerships and pilots. As the project is still at the planning stage, terms are discussed individually.
TEL +81 50-3122-4431Weekdays 10:00–18:00 (JST)